MC3400 Handheld Computer

Name: MC3400 Handheld Computer
SKU: MC3401-0G1R63SS-A6
Availability: InStock

2.321,87 €

MC34, LAN, WIFI 6E, Gun, Bluetooth, NFC, 4.0 Display, Vibrator, Android GMS, SE58 Imager, 5MP FF + 13MP RF Camera, 6GB RAM / 128GB UFS, 38 Key, 7000mAh Standard Battery, Rest of World

176 disponibili

Aggiungi alla lista dei desideri

COD: MC3401-0G1R63SS-A6 Categoria: MC3400

MC34, LAN, WIFI 6E, Gun, Bluetooth, NFC, 4.0 Display, Vibrator, Android GMS, SE58 Imager, 5MP FF + 13MP RF Camera, 6GB RAM / 128GB UFS, 38 Key, 7000mAh Standard Battery, Rest of World

Achieve full-shift productivity with two models: gun and straight-shooter Choose the right scanner for the job - 4 scan engine options (SE4710 for standard range, SE4770 for indoor/outdoor applications, SE55 from near up to 40 ft, for long range scanning use the SE58 that scans up to 100 ft) Choose from three keypads with improved design, that offer larger keys with optimized spacing for faster, accurate data entry—even with gloves High-resolution front and rear cameras are NOW available in both the gun and straight shooter form factors Backward compatibility to MC3300 chargers and batteries

MNT-MC33-FLCH-01

Bracket holds all MC3X00configurations, except RFID units, forconvenient mounting on fork lift. Installs on a roll bar or square surfaceof the forklift and allows the device tobe used in landscape or portrait mode. Includes RAM 1 diameter ball onback of cradle. Does NOT charge MC3X00. Works with Zebra’s high-end performance products.

BRKT-SCRD-SMRK-01

Allows for rack and wall mounting of one 5-Slot, 10-Slot, or 20-Slot Charger. Also can be used to mount up to four 4Slot Battery Chargers or Single-Slot Cradles Bracket can be mounted on standard 19 network rack or on a wall. Cable routing slots & removable power supply holder tray. Adjustable tabs & screw mounts for easy hanging/installation. Works with Zebra’s high-end performance products.

3PTY-RAM-102U-B-247

MNT-RAM-B247U25

Typically used with Fork Lift Holder for MC3300 or MC9300 Attaches to square shaped rail/post of forklift 2.5 Max Width Square Rail Base with 1 diameter ball (B size) Uses RAM P/N RAM-B-247U-25 Works with Zebra’s high-end performance products.

3PTY-RAM-B-102U-247

3PTY-PCLIP-711357

3PTY-RAM-138U

3PTY-RAP-365-224-1BU

3PTY-RAP-251U

3PTY-RAM-103-238U

3PTY-PCLIP-216095

3PTY-RAM-202-225B-2U

CBL-MC33-USBCHG-01

Only compatible with MC33. Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra Mobile Computers Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

CBL-TC5X-USBC2A-01

Used to communicate with CC6000via the USB OTG port. Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra Mobile Computers Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

25-124330-01R

Used to communicate with CC5000 via the USB OTG port. Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra Barcode Scanners and Mobile Computers. Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

SAC-MC33-20SCHG-01

Charges MC33 or MC32 sparebatteries (1X/Standard or 2X/Extendedsize). Uses 5-Slot ShareCradle with five 4-Slot Battery Chargers (SAC-MC33-4SCHG-01) attached. Does NOT support fast-charging ofMC33 batteries. All battery typescharged at standard rate:- charges 1X battery from 0-90% inabout 3 hours at standard chargingrate.- charges 2X battery from 0-90% inabout 5.5 hours at standardcharging rate.Can be racked/mounted in a standard19 inch rack system via the mountingaccessory (BRKT-SCRD-SMRK-01). Can be racked/mounted in a standard19 inch rack system via the mountingaccessory (BRKT-SCRD-SMRK-01). Works with Zebra’s high-end performance products.

CRD-MC33-4SE4BC-01

Allows network speeds up to 1 Gb Will charge up to four MC33 terminalsand four MC33 or MC32 sparebatteries. Supports fast-charging of MC33devices and MC33 batteries:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Can be racked/ mounted in astandard 19 inch rack system via themounting accessory (BRKT-SCRDSMRK-01) Works with Zebra’s high-end performance products.

CRD-MC33-5SETH-01

Allows network speeds up to 1 Gb Will charge up to five MC33 units. Supports fast-charging of MC33:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Can be racked/ mounted in astandard 19 inch rack system via themounting accessory (BRKT-SCRDSMRK-01) Works with Zebra’s high-end performance products.

CRD-MC33-4SC4BC-01

Will charge up to four MC33 terminalsand four MC33 or MC32 sparebatteries. Supports fast-charging of MC33devices and MC33 batteries:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Can be racked/ mounted in astandard 19inch rack system via themounting accessory (BRKT-SCRDSMRK-01) Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

CRD-MC33-5SCHG-01

Will charge up to five MC33 units. Does not charge spare batteries. Supports fast-charging of MC33:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Can be racked/ mounted in astandard 19inch rack system via themounting accessory (BRKT-SCRDSMRK-01) Works with Zebra’s high-end performance products.

SAC-MC33-4SCHG-01

Supports charging of both MC33 andMC32 batteries. Supports fast-charging of MC33batteries:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Can be used standalone or up to fourchargers can be installed on Multi-SlotWall/Rack Mount Bracket (BRKT-SCRDSMRK-01). Not compatible with MC3000 orMC3100 series spare batteries. Works with Zebra’s high-end performance products.

CRD-MC33-2SUCHG-01

Provides USB support Supports MC33 terminal and sparebattery charging Will charge spare battery for MC33 orMC32. Supports fast-charging of MC33device and MC33 battery:- charges 1X battery from 0-90% inabout 2 hours vs. 3 hours forstandard charging rate.- charges 2X battery from 0-90% inabout 3.5 hours vs. 5.5 hours forstandard charging rate. Works with Zebra’s high-end performance products.

PWR-BGA12V108W0WW

Replaces PWRS-14000-241R Used to power 10-Slot Cradles 9A, 108W Level VI Efficiency rated Works with Zebra’s high-end performance products.

BTRY-MC33-70MA-IN

BTRY-MC3X-70MA-01

PWR-BGA12V50W0WW

100-240 VAC,12V, 4.16A, 50W Provides US DOE Level VI compliance for power efficiency Replaces PWRS-14000-148R Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

CHG-AUTO-USB1-01

Used with Rugged Charging Cable(3PTY-BTEK-DX30CHG) Includes two USB A ports providinghigher current (2.5A) for faster charging This genuine accessory is made to work with select Zebra Mobile Computers Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

3PTY-RAM-D-254U

PWR-WUA5V12W0EU

Used with USB-C Cable to provide a lower cost charging solution than using a Cradle. Also used to power Single Slot Charge-Only Base Cradle (TBD). Provides higher current (2.5A) for faster charging 100-240 VAC, 5 V, 2.5 A Works with Zebra’s high-end performance products.

PWR-WUA5V12W0GB

CBL-DC-381A1-01

Used to power 5-Slot ShareCradles when using Level VI Efficiency power supply (PWR-BGA12V108W0WW) This cable does not include the black extension release latch which is not required when used on Multi-Slot ShareCradles. CBL-DC-382A1-01 is still typically used though Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

50-16000-219R

This cord is 1.8 meters long Type G BS1363 plug This genuine accessory is made to work with select Zebra Barcode Scanners Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

50-16000-671R

Cord is 1.8 meters long Type L CIE 23-16 plug This genuine accessory is made to work with select Zebra Barcode Scanners Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

50-16000-669R

Certified Zebra Accessory. Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra products. Built to ensure the highest quality, reliability, and performance. Choose Zebra accessories for the best compatibility.

50-16000-220R

23844-00-00R

Used with Power Supply PWRBGA12V72W0WW and Power supply PS1450 (when it includes Power Supply PWR-BGA12V72W0WW). Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra Barcode Scanners, Mobile Computers, and RFID Products. Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

50-16000-217R

This cord is 1.9 meters long Type I AS 3112 plug This genuine accessory is made to work with select Zebra Barcode Scanners Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

50-16000-257R

Cord is 1.8 meters long Type I plug This genuine accessory is made to work with select Zebra Barcode Scanners, Mobile Computers, and RFID Products. Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

CBL-DC-388A1-01

This AC Clip is normally included with PWR-WUA5V6W0WW 2 pin Australia plug This genuine accessory is made to work with select Zebra Barcode Scanners Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

Rugged Headsets

SG-MC3021212-01R

Includes modification with a softer beltloop and stronger button snap to avoidthe button from snapping open whenthe MC3x00 is inserted into the holster. Devices with Rubber Boot (11-72959-04R) will fit into Holster. The fit will betight though. Compatible with all MC3X series,including MC33. Not compatible withRFID devices though. MC33 RFID units must be insertedinto cradle with bottom of deviceinserted first. Works with Zebra’s high-end performance products.

3PTY-MOB-001054

3PTY-RAM-D-202U

SG-TC7X-STYLUS-03

Includes fine-pitch, capacitive Stylus(SG-TC7X-STYLUS1-03) and coiledtether (KT-TC7X-TETHR1-03) Conductive Carbon-filled plasticmaterial w/ 5mm tip Length of stylus is 3.5. Rigid plastic stylus is optimized forenterprise durability. Works with Zebra’s high-end performance products.

MISC-MC34-SCRN-01

11-08062-02R

Belt is 2 inches wide Extends to 48 inches Has improved buckle and softer belt material Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

3PTY-AG-AL4601DW

SG-MC34-RDHLST-01

SG-MC34-HDSTPB-01

SG-MC33-HDSTPG-01

This is the same strap that ships withthe MC33 Gun units. Only compatible with MC33. This genuine accessory is made to work with select Zebra Mobile Computers Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.

58-40000-007R

1.5 wide, 22 to 50 max. length Zebra accessories are manufactured to meet all of Zebra’s standards. This genuine accessory is made to work with select Zebra Mobile Computers Built to ensure the highest quality, reliability, and performance. Works with Zebra’s high-end performance products.